Place Call Using Name, Number Or Address - Cisco TelePresence DX70 User Manual

9
Place Call

Place Call Using Name, Number or Address

Tap the Call button.
Key in a name, number or address. Possible matches
and/or suggestions will appear as you type. If the correct
match appears in the list tap that match, otherwise keep
typing.
Tap the Search or Dial field. This will invoke the
keyboard
When you have typed or located whom to call,
tap either of the green Call buttons to place
the call.
About Placing Calls
You may call someone who is not
listed in your list of contacts by key-
ing in their name, address or number
using the virtual keyboard of the
Touch pad.
Anyone you have previously called
will appear in the Recents list (until
you clear that list) and you may then
transfer any of them to your list of
Favorites. This is described in the
section Contacts.
Sometimes you may be urged to
enter numbers during a call, typically
to reach extensions or to provide a
pin code.
Tap Touch Tones (this button ap-
pears as soon as the call is placed)
to invoke the keypad needed for this.
D1510413 User Guide
Cisco TelePresence DX70, DX80
Produced: April 2016 for CE8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.