Place Call Using Name, Number Or Address; About Placing Calls - Cisco DX70 User Manual

Video Calls

Place Call Using Name, Number or Address

1
Tap the green Call button.
3
Key in a name, number or address. Possible
matches and/or suggestions will appear as you
D1510418 User Guide
type. If the correct match appears in the list tap that
Cisco TelePresence DX70, DX80
Produced: June 2017 for CE9.0 match, otherwise keep typing.
All contents © 2010–2017
Cisco Systems, Inc. All rights reserved.
2
Tap the Search or Dial field. This will invoke the
keyboard
4
When you have typed or located whom to call,
tap either of the green Call buttons to place the
call.
11

About Placing Calls

You may call someone who is not
listed in your list of contacts by keying
in their name, address or number
using the virtual keyboard of the Touch
pad.
Anyone you have previously called
will appear in the Recents list (until
you clear that list) and you may then
transfer any of them to your list of
Favorites. This is described in the
section Contacts.
Sometimes you may be urged to enter
numbers during a call, typically to
reach extensions or to provide a pin
code.
Tap Touch Tones (this button appears
as soon as the call is placed) to invoke
the keypad needed for this.