Casio TE-1500 Setup Manual page 23

Example - To program the standard credit function key to be a credit card
electronic payment key:
 PGM Mode
 Enter 3 and depress Subtotal
 Enter 10000 and depress the CREDIT function key
 Depress Subtotal to end the process
Note: After performing the above process in REG mode if a transaction is
entered and the CREDIT key is depressed and the cash drawer opens without a
SWIPE CARD message on the operator display then it means the key was not
programmed properly. Try the programming process again.
There are several programming options available for online payment
applications. This section will list each of those options.
1. Debit Cash Back
2. Credit Card Manual Entry Option
3. Hospitality Options
There is a program option to allow over-tendering on a debit card transaction
for the purpose of getting cash back. There can be up to four (4) different
cash back values that can be programmed into the machine. There are
controls for allowing credit card numbers to be entered manually due to a
card swipe not being recognized or inputting a credit card number over the
phone. When entering a card number manually controls can be required to
verify the card's authenticity. Additional information such as the CVV
number, Zip Code or Address can be entered on any manual credit card
entry. Lastly, there are program options related to restaurant applications
such as credit card tips and activating restaurant mode on the credit card
device that can be activated.
General Function Programming
23