Edit A Contact List Entry Status, Then Place The Call - Cisco TelePresence SX10 User Manual

8 Place Call

Edit a Contact List Entry Status, then Place the Call

Make sure Call is selected and
press OK or the green Call
button.
Use the Cursor keys to move
the cursor down to select the
More field ( ... ) and press OK.
Use the Cursor keys to go
between Favorites, Recents and
Directory and then down in one
of the lists.
You may now use the Cursor
keys to move the cursor to
select any of the available
options. Press OK to enter.
Once set, press the green Call
button to place the call.
Once an entry has been
located, press OK to invoke
the Call menu.
About Entry Edits
You may have to edit an entry in one
of the Contact lists before you place
the call. There may be a need to add
a prefix, a suffix or otherwise alter
the entry to ensure success.
At the same time, this set of options
allow you to change the Call Rate
(the bandwidth allocated to the call
referred to as Custom call) as well
as the ability to promote the current
entry to become a Favorite.
D1509705 User Guide
Cisco TelePresence SX10, SX20
Produced in November 2015 for CE8.0
All contents © 2014—2015
Cisco Systems, Inc. All rights reserved.