Gain Access To The Settings - Cisco TelePresence SX10 User Manual

28 Settings

Gain Access to the Settings

To gain access to the Settings
menu, navigate to the upper
left corner of the screen and
press OK on the remote
control. Then navigate down to
System Information and press
OK again.
The Settings shows basic information about the system as well as providing
access to the Setup Wizard and the ability to force a restart of the system.
About Settings
The System information page
provides information on IP address,
MAC address, SIP Proxy, software
version installed and device name.
The system can be restarted from
here and setup wizard is available
via Advanced settings.
D1509705 User Guide
Cisco TelePresence SX10, SX20
Produced in November 2015 for CE8.0
All contents © 2014—2015
Cisco Systems, Inc. All rights reserved.