View Camera Settings - Cisco TelePresence SX10 User Manual

24 Camera

View Camera Settings

In a call or outside a call (as
shown here), move cursor up
the upper right corner to the
Camera icon. Press OK.
Press Back to exit the menu.
The camera icon will now
appear. Press OK.
Make self-view sticky
(always shown).
Use Arrow keys, OK and
Back for this.
You may now may now make the
self-view image sticky, maximize
and/or adjust the pan, zoom and
tilt of the camera.
Maximize/minimize
self-view.
Pan, tilt
and zoom
controls.
About Camera Settings
The camera settings let you control
the zoom, pan and tilt of your own
camera.
In addition self-view ( correspond-
ing to the image that the others see
from your system) can be turned on
and off as well as be shown mini-
mized or maximized. The self-view
image may also be moved to another
position on the screen—see the
following page for more on moving
the self-view.
D1509705 User Guide
Cisco TelePresence SX10, SX20
Produced in November 2015 for CE8.0
All contents © 2014—2015
Cisco Systems, Inc. All rights reserved.