Hookswitch Button; Cisco Unified Ip Phone 6911; Phone Connections - Cisco 6901 User Manual

Hookswitch Button

4
5
6
7
Hookswitch Button
The cradle rest of your phone contains the hookswitch button. You can press and quickly release the hookswitch
button to activate features (hookflash) on your phone.

Cisco Unified IP Phone 6911

The following sections describe the Cisco Unified IP Phone 6901 hardware.

Phone Connections

For your phone to work, it must be connected to the corporate IP telephony network.
Cisco Unified IP Phone 6901 and 6911 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and
SIP)
4
Line button Allows you to pick up a second incoming call. The Line button LED indicates the
call status.
Allows you to answer a ringing call and swap between two calls on the same line.
Also, you can use the line button to create a new call when the phone is idle. The
LED associated with the line button lights up to reflect the line status.
Color LEDs indicate the line state:
• Green, steady—Active call
• Green, flashing—Held call
• Amber, Flashing—Incoming call
• Amber, steady—Call Forward All activated
• Red, steady—Remote line in use (shared line)
• Red, flashing—Remote line on hold
Volume button Controls the handset (off hook) and the ringer volume (on hook).
Keypad Allows you to dial phone numbers.
Handset with Lights up to indicate a ringing call (flashing red) or a new voice message (steady red).
light strip
Features of Your Cisco Unified IP Phone