Honeywell 10 kW Owner's Manual page 39

Air-cooled automatic standby generators
Hide thumbs Also See for 10 kW:
Table of Contents

Advertisement

United States Environmental Protection Agency Compliance Requirements
Purchaser's/Owner's Recordkeeping Responsibilities
Le United States Environmental Protection Agency (EPA) and Generac Power Systems, Inc. (Generac), are pleased to explain your recordkeeping require
ments for compliance with Subpart JJJJ - Standards of Performance for Stationary Spark Ignition Internal Combustion Engines as listed in the Electronic
Code of Federal Regulations Title 40 Part 60. As the engine purchaser/owner who operates and maintains their certified emergency stationary engine and
emission control system according to applicable emission related guidelines as specified in this Owner' s Manual you are required to meet the following
notification and recordkeeping requirements to demonstrate compliance. 1.) Maintain documentation that the engine is certified to meet emission standards.
2) Recordkeeping of maintenance conducted. 3.) Recordkeeping of the provision allowing natural gas engines to operate using propane for amaximum ot
100 hours per year as an alternate fuel solely during emergency operations provided the engine is not certified to operate on propane. 4) Meet aH compliance
notifications submitted to the purchaser/owner and maintain all supporting documentation. 5.) Recordkeeping of hours of operation, including what classified
the operation as emergency and how many hours are spent for non-emergency operation. For emergency engines greater than or equal to 130 HP, record
keeping of hours of operation begins January 1,2011. For emergency engines less than 130 HR recordkeeping of hours of operation begins January 1,2009;
Engines are equipped with non-resettable hour meters to facilitate recordkeeping.
Specific Air Quality Management or Air Pollution Control Districts may have different and additional record keeping/ reporting requirements. Your permit to
construct and/or operate the engine may be contingent upon compliance with those requirements. Check with your local Air Quality Management or Air Pollu
tion Control District for specific requirements.
Emergency stationary internal combustion engines (ICE) may be operated for the purpose of maintenance checks and readiness testing, provided that the
tests are recommended by Federal, State or local government, Generac, or the insurance company associated with the engine. Maintenance checks and
readiness testing of such units is limited to 100 hours per year. There is no time limit on the use of emergency stationary ICE in emergency situations. The
purchaser/owner may petition the Administrator for approval of additional hours to be used for maintenance checks and readiness testing, but apetition is
not required if the owner maintains records indicating that Federal, State, or local standards require maintenance and testing of emergency ICE beyond 100
hours per year. Emergency stationary ICE may operate up to 50 hours per year in non-emergency situations, but those 50 hours are counted towards the 100
hours per year provided for maintenance and testing. The 50 hours per year for non-emergency situations cannot be used for peak shaving or to generate
income for afacility to supply power to an electric grid or otherwise supply power as part of afinancial arrangement with another entity. For purchaser/owner
of emergency engines, any operation other than emergency operation, maintenance and testing, and operation in non-emergency situations for 50 hours per
year, as permitted in this section is prohibited.
If you operate and maintain your certified emergency stationary SI internal combustion engine and emissions control systems in accordance to the specifica
tions and guidelines in this Owner's Manual EPA will not require engine performance testing. If not, your engine will be considered non-certified and you must
demonstrate compliance according to Subpart JJJJ - Standards of Performance for Stationary Spark Ignition Internal Combustion Engines as listed in the
Electronic Code of Federal Regulations Title 40 Part 60.
Emission-Related Installation Instructions
/our certified emergency stationary engine has pre-set emission control systems or components that require no adjustment. Inspection and replacement of
an emissions related component is required to be done so in accordance with the requirements cited in the United States Environmental Protection Agency
Warranty Statement or can be arranged by contacting your selling dealer or aGenerac Authorized Warranty Service dealer, 888-GENERAC (888-436-3722) or
www.generac.com for the dealer nearest you. Failing to follow these instructions when installing acertified engine in apiece of nonroad equipment violates
federal law 40 CFR 1068.105 (b), subject to fines orpenalties as described in the Clean Air Act.
Part 2
PartNo. 0H1916 Rev A
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

12 kw15 kw20 kw

Table of Contents