Advertisement
the blending attachment
Using the blending attachment
Ensure that the appliance is switched off and unplugged from the supply socket
if it is left unattended and before assembling, disassembling or cleaning.
The blending shaft blades have very sharp edges. Take care when handling or
cleaning it.
Do not operate the blending attachment continuously for more than one minute
For the most consistent results, food should be processed in small quantities and be cut
into 1 inch cubes before blending.
1. Squeeze and hold the two buttons on the side of the motor together.
2. Line up the two cut outs (one on each side) of the blending shaft with the buttons.
Release the two buttons. Ensure that the motor unit and the blending attachment are
correctly assembled and securely locked in position.
3. You can fit the beaker cover/non-slip foot over the bottom of the beaker to provide a
non-slip base during processing. After processing, it can be removed from the base
and fitted over the top of the beaker to store ingredients before use.
4. Insert the blending attachment into the food.
5. Press the ON button. You can adjust the speed of your hand blender using the
variable speed control. Use the TURBO button when processing tougher ingredients.
Guide your blender through the food, moving it slowly up, down and from side to side.
Your hand blender will operate until the button is released.
When pureeing food, it is important to use enough liquid (juice, milk, cream, broth, etc.) to
create a smooth mixture.
•
Adjust the consistency of the mixture by adding more liquids or soft solids.
•
Don't use the blending attachment to process meat or cheese.
6
without giving it a rest period of one minute.
Advertisement
