Add A Mode With Different Rules For Each Camera - NETGEAR ARLO PRO User Manual

or click > next to the mode.
4. Tap
5. Under Rules, tap
6. Select the Turn Siren ON check box.
or click > next to Sound Alarm.
7. Tap
8. Set the sliders for Siren Duration and Siren Loudness.
9. Tap < Edit Rule or click Back.
10. Tap Done or click Save.
Note:
Note: This rule is not active until you activate the mode to which you added the
siren trigger.

Add a Mode With Different Rules for Each Camera

With Arlo Pro Wire-Free, you can create multiple rules within the same mode so
that each camera performs different actions and sends different alerts.
You can also use schedule mode to activate modes automatically at different times
of the day or week. For more information about schedule mode, see
on page 48.
¾ To add a mode with different actions or alerts for different cameras:
1. Tap the Arlo icon
If you are using a computer, enter
browser.
The Devices page displays.
2. Tap or click Mode.
A list of cameras displays.
3. Tap or click the camera.
4. Tap or click Add a Mode.
The New Mode page displays.
5. Enter a name for the mode and Tap or click Next.
The Trigger Device page displays.
Modes, Rules, and Smart Alerts
or click Edit next to the camera.
on your mobile device.
arlo.netgear.com
53
Add a Schedule
in the address bar of a