Add A Mode - NETGEAR ARLO PRO User Manual

Add a Mode

You can add new modes to tell your Arlo Pro camera what to do in certain
situations. For example, you can set your Arlo Pro camera to record videos when
the motion sensor is activated and to alert you with an email message.
You can use the rules you create within modes and schedules to customize your
Arlo Pro camera. With Arlo Pro cameras, you can create one rule for each mode.
¾ To add a mode for a camera:
1. Tap the Arlo icon
If you are using a computer, enter
browser.
The Devices page displays.
2. Tap or click Mode.
A list of cameras displays.
3. Tap or click the camera.
4. Tap or click Add a Mode.
The New Mode page displays.
5. Enter a name for the mode and Tap or click Next.
The Trigger Device page displays.
6. Tap or click When motion is detected and When audio is detected and then
Tap or click Next.
The Motion Settings page displays.
7. Set the motion sensitivity.
You can use the sliders to adjust the sensitivity of the motion sensor:
• Raise the sensitivity percentage to increase the number of videos that Arlo
captures.
• Lower the sensitivity percentage to decrease the number of videos that Arlo
captures.
8. Tap or click Next.
The Audio Settings page displays.
on your mobile device.
arlo.netgear.com
51
in the address bar of a