Advertisement
When a single scale is detected and paired with the monitor, the monitor will display the Pairing Successful message. If there is only one
scale in the vicinity, that scale will be the one that the monitor will pair with.
If the monitor is unable to detect the scale, it will display the "Pairing Failed" message.
If the pairing failed, check to make sure that the scale has power and that the adapter is properly connected to the monitor and that the
Bluetooth adapter red LED is ON. Also, verify that the scale is located close enough to the monitor, and less than 10 meters or about 30
feet away.
After a failed attempt to detect a wireless scale, the DM Monitor screen will ask if you desire a scan for available Bluetooth devices. After
verifying that the scale has power and is the appropriate distance from the monitor, press YES to retry.
P4607EN.01
Pairing Successful
Pairing Failed
12/2010
8
Advertisement
