Advertisement
Please Wait
Scanning Devices . . .
: Establishing communications may take several minutes.
NOTE
During the Paring process the Bluetooth adapter blue LED (light emitting diode) will flash on and off, indicating activity. The red LED
should be ON, indicating that the adapter is powered by the monitor. Check the DM Monitor-to-Bluetooth adapter connection if
the red LED is not ON.
When the blue diode is flashing, the Bluetooth adaptor is searching for devices in the vicinity.
When the DM Monitor and Bluetooth Adapter have located the suitable devices in the area, a list will appear and prompt the user
to select a scale to pair to the monitor.
Only one device or serial number is displayed on the monitor at a time. Pressing the NO button, for example, goes down the list,
from 1 to 2 to 3 to 4 . . . back to 1. Pressing the YES button goes up the list, from 1 to the end of the list . . . to 4 to 3 to 2 to 1.
The RETEST button selects the currently displayed serial number.
• IMPORTANT •
If a scale serial number appears on the monitor display screen for more than 30 seconds,
the monitor will automatically select and pair with that scale.
NOTE: If the monitor pairs to a different scale than the one desired, see the Bluetooth Wireless Scale Troubleshooting section that
appears after this section.
Select Scale To Pair. . .
1. 5094950014
12
P4607EN.01
12/2010
Advertisement
