Advertisement
the scale and monitor are too far apart, or if items or personnel are blocking the signal, then the scale and monitor will not be able to
connect and communicate with one another as needed for proper functionality.
The monitor will display the "Please Wait Scanning Devices" message as it scans for suitable Bluetooth devices in the nearby vicinity. The
DM Monitor locates, senses, and pairs with a single scale automatically.
Please Wait
Scanning Devices
NOTE: Establishing communications may take several minutes.
The Bluetooth adapter activity light emitting diodes will flash blue and red. When the blue diode is flashing, the Bluetooth devices in the
vicinity are being scanned, sensed, and connected to the DM Monitor. The blue LED is the Number One LED. The red LED should be ON,
indicating that the adapter is powered by the monitor. Check the DM Monitor-to-Bluetooth adapter connection if the red LED is not ON.
7
P4607EN.01
12/2010
Advertisement
