Advertisement
Connecting a HomMed Bluetooth (wireless) Scale
These instructions cover preparing the DM Monitor to use a Bluetooth adapter and wireless Honeywell HomMed Bluetooth Scale. Three
basic actions are involved:
1. Installing the Honeywell HomMed Bluetooth adapter.
2. Connecting one wireless scale.
3. Connecting when multiple wireless scales are in the area.
The DM Monitor must be configured to use a Bluetooth wireless scale. After completing the configuration process, the Scale is ready for
use. The configuration process would only need to be repeated if the monitor will be used with a different wireless scale or if the monitor
will be used with the regular "wired" scale.
Installing the Honeywell HomMed Bluetooth adapter
The wireless scale kit includes a Bluetooth Adapter and an Adapter Cable. If needed, securely connect the Adapter Cable to the
Bluetooth Adapter, (Note: they should arrive already connected together in the monitor kit).
slide switch on the top of the Adapter is positioned toward the Connector end of the adapter to enable proper transmission and data flow between
the wireless scale and the DM Monitor.
P4607EN.01
For the Bluetooth Adapter, assure that the
12/2010
4
Advertisement
