Symbology Settings - Honeywell Dolphin CT50 User Manual

Data Processing Settings (continued)
Setting
Scan to Intent
Launch EZ Config
Dolphin CT50 Mobile Computer User Guide
Description
Enable or disable special handling of scan-to-intent bar
codes. Applies to bar codes in one of the following
formats:
'//' ACTION
'//' ACTION '$' extra-data
Where:
ACTION and extra-data are any string of characters.
Launches an application listening for the intent:
Intent action: "com.honeywell.scantointent.intent.action."
+ ACTION
Intent extra
"com.honeywell.scantointent.intent.extra.DATA" contains
the remainder of the bar code data after the first '$'
character.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_SCAN_TO_INTENT
Enable or disable special handling of EZConfig bar
codes. Applies to EZConfig bar codes, which are
encoded with the Aztec symbology and containing
specific header data.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_LAUNCH_EZ_
CONFIG

Symbology Settings

Use the Symbology Settings to enable and disable bar code
symbologies. Tap a symbology to view and modify the symbology
configuration parameters.
Symbology Settings
Setting
Code 128
GS1-128
Code 39
Datamatrix
UPC-A
Chapter 3 — About the Scanner
Default
Enabled
Enabled
Enabled
Enabled
Enabled
Default
Enabled
Enabled
39