Makita BHS630 Technical Information page 10

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-6. Blade Case Complete
DISASSEMBLING
(5) Remove Blade cover and Duct from Blade case complete as drawn in Fig. 13.
Fig. 13
1. Remove two 4x12 Tapping screws
with which Blade cover and Duct
are secured to Blade case complete.
Blade cover
Duct
ASSEMBLING
(1) Take the reverse step of Disassembling. Refer to Figs. 13 and 12.
Note in Assembling:
Tension spring 4 has to be connected to Safety cover and Blade case as drawn in Fig. 14.
Fig. 14
Blade side
2. Remove Blade cover from Blade
case complete by levering up with
1R263, inserted into the gap between
Blade case complete and Blade cover.
1R263
Pass the Hook from Blade side to Gear section side.
Blade case
Tension spring 4
Gear section side
Safety cover
Pass the Hook from Gear section side to Blade case.
P 10/ 16
3. Remove Duct from Blade
case complete.
Duct