Download Print this page

Makita TD0101 Technical Information page 6

Hide thumbs Also See for TD0101:

Advertisement

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Anvil and Bit holding Mechanism
DISASSEMBLING
(1) Remove Hammer case section as illustrated in Figs. 2 and 3.
(2) Remove Bearing box, Internal gear 43 and Hammer section from Hammer case complete as illustrated in Fig. 4.
Fig. 8
Ring spring 10
Sleeve
Anvil
Hammer Case
Complete
1R232
Use 1R232, for stabilizing Sleeve
in the position where Ring spring 11
can be easily removed.
Fig. 10
1R232
Flat washer 11, Compression spring 13
and Sleeve are removed from Anvil.
Note: In case of repairing exclusively for Bit holding mechanism (Bit sleeve, Compression spring 13, Flat washer 11),
it is not necessary to disassemble Hammer case complete from the machine.
ASSEMBLING
Take the disassembling step in reverse.
Fig. 9
Raise this side (opposite to the expanded side) with index finger.
Press the top of Sleeve
with thumb.
Flat washer 11
Compression
spring 13
Hammer case
Bit sleeve
complete
Anvil
Anvil and Nylon washer 14 can be removed
from Hammer case complete.
Pay attention not to lose Steel ball 3.
Ring spring 10
Sleeve
Anvil
Nylon washer 20
Steel ball 3 (2psc.)
P 6/ 14
Expand Ring spring 11
with 1R291.

Advertisement

loading

This manual is also suitable for:

Td0101f