SPECIFICATIONS Model TD0101/TD0101F Capacities Machine screw 4 mm - 8 mm Standard bolt 5 mm - 14 mm High tensile bolt 5 mm - 10 mm No load speed (min 0 - 3,600 Impacts per minute (min 0 - 3,200 Max.
10. If the cord is damaged, have it replaced by the Power tool use and care manufacturer or his agent in order to avoid a Do not force the power tool. Use the correct safety hazard. power tool for your application. The correct power tool will do the job better and safer at the Personal Safety rate for which it was designed.
Keep hands away from rotating parts. Lighting up the lamp (Model Use auxiliary handle(s), if supplied with the TD0101F only) tool. Loss of control can cause personal injury. Hold the power tool by insulated gripping sur- faces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live"...
To install these types of bits, follow case, try re-inserting the bit according to the A=17mm the procedure (1). instructions above. B=14mm (Note) Makita bits are these types. To install these types of bits, follow OPERATION A=12mm the procedure (2). B=9mm (Note) Bit-piece is necessary for installing the bit.
NOTE: NOTE: • The size of wood screw which can be fastened • Use the proper bit for the head of the screw/bolt with this tool may differ depending upon the type that you wish to use. of material to be fastened. Always perform a test • When fastening screw M8 or smaller, carefully operation to determine the size of wood screw. adjust pressure on the switch trigger so that the screw is not damaged.
► 1 . Screwdriver 2. Brush holder cap • Adjustable locator with bit To maintain product SAFETY and RELIABILITY, Adjustable locator with bit repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: • These accessories or attachments are recom- mended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons.