Page 1
INSTRUCTION MANUAL Impact Driver TD0101 TD0101F 009756 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH SPECIFICATIONS Model TD0101/TD0101F Machine screw 4 mm - 8 mm Capacities Standard bolt 5 mm - 14 mm High tensile bolt 5 mm - 10 mm No load speed (min 0 - 3,600 Impacts per minute (min 0 - 3,200 Max.
increase the risk of electric shock. 18. Do not use the power tool if the switch does Do not abuse the cord. Never use the cord for not turn it on and off. Any power tool that cannot carrying, pulling or unplugging the power tool. be controlled with the switch is dangerous and Keep cord away from heat, oil, sharp edges or must be repaired.
Always be sure you have a firm footing. Connect the plug to light up the lamp. The lamp keeps Be sure no one is below when using the tool in on lighting while the plug is connected. high locations. NOTE: Hold the tool firmly.
006348 For other countries To install these types of bits, follow A=17mm the procedure (1). B=14mm (Note) Makita bits are these types. To install these types of bits, follow A=12mm the procedure (2). 009761 B=9mm (Note) Bit-piece is necessary for installing the bit.
Bolt Makita Authorized Service Centers, always using Makita Even though the torque coefficient and the • replacement parts.
Page 7
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Screw bits • Socket bits • Bit piece •...