Makita TD0101 Technical Information page 4

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Hammer Case Complete
DISASSEMBLING
(2) The removed Hammer case section is disassembled as illustrated in Fig. 4.
Fig. 4
Hold the flat portion of Hammer
case complete in vise with 1R041.
Hammer case
complete
Vise
ASSEMBLING
(1) Use 134847-1 as a supporting jig for Bearing box and assemble Hammer case complete as illustrated in Fig. 5.
Fig. 5
Set Bearing box to 134847-1 held with vise.
And then insert the ring portion of Internal
gear 43 into Bearing box.
Internal
gear 43
Bearing box
134847-1
Attach 134847-1 and 1R224 to 1R223,
and fit 134847-1 to the hex portion of
Bearing box.
Then turn 1R223 clockwise.
1R223
1R224
flat portions
134847-1
Bearing box
1R041
while engaging Spur gear 17
with Internal gear 43.
ring portion
Bearing
box
Vise
Assemble Hammer section
Hammer
section
Spur gear 17
Internal
gear 43
Hammer case complete can
be disassembled as illustrated
below.
Hammer case
complete
Internal gear 43
Bearing box
Assemble Hammer case complete
to Bearing box while aligning the
hollows of Bearing box to the
projections of Internal gear 43.
Then turn Hammer case complete
counterclockwise by hand and
tighten as firm as possible.
hollow (6 pcs.)
projections (6pcs.)
Internal gear 43
P 4/ 14
Hammer
Hammer case
complete
Bearing
box