ENGLISH (Original instructions) SPECIFICATIONS Model TD0101/TD0101F Machine screw 4 mm - 8 mm Capacities Standard bolt 5 mm - 14 mm High tensile bolt 5 mm - 10 mm No load speed (min 0 - 3,600 Impacts per minute (min 0 - 3,200 Max.
Page 3
Power tool plugs must match the outlet. Never Makita Corporation responsible modify the plug in any way. Do not use any manufacturer declare that the following Makita adapter plugs with earthed (grounded) power machine(s): tools. Unmodified plugs and matching outlets will Designation of Machine: reduce risk of electric shock.
14. Remove any adjusting key or wrench before tool is maintained. turning the power tool on. A wrench or a key left 26. Follow instruction lubricating attached to a rotating part of the power tool may changing accessories. result in personal injury. 27.
Reversing switch action FUNCTIONAL DESCRIPTION 1. Reversing switch CAUTION: lever Always be sure that the tool is switched off and • unplugged before adjusting or checking function on the tool. Switch action 1. Switch trigger 009759 This tool has a reversing switch to change the direction of rotation.
For other countries OPERATION To install these types of bits, follow A=17mm the procedure (1). B=14mm (Note) Makita bits are these types. To install these types of bits, follow A=12mm the procedure (2). B=9mm (Note) Bit-piece is necessary for installing the bit.
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Screw bits • Socket bits • Bit piece •...
Page 12
Makita Corporation Anjo, Aichi, Japan www.makita.com 884879C221...