Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Locator Section
ASSEMBLING
1) Assembling of Locator base complete, Locator complete, Leaf spring and related parts. (Fig. 4)
Fig. 4
1. Mount Locator complete to Locator base complete and fix them
to Housing set by tightening counterclockwise with adjustable wrench.
Locator complete
Locator base complete
3. Fit the tab of Leaf spring to Housing top as described below, then fix the other tab of Leaf spring to
Housing bottom with pliers.
protrusion on
Housing top
4. Fix Ring spring 33 in the groove on Locator base complete as described below.
Locator base
complete
tab of
Leaf spring
Ring spring 33
2. Remove Locator complete again,
then put Rubber plate in place.
Locator complete
Locator base complete
Rubber plate
protrusion on
Housing bottom
Ring spring 33
P 4/14
Advertisement
