Makita BFS440 Instruction Manual
Cordless screwdriver
Hide thumbs
Also See for BFS440:
- Instruction manual (41 pages) ,
- Technical information (7 pages) ,
- Instruction manual (25 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita BFS440
Summary of Contents for Makita BFS440
- Page 1 INSTRUCTION MANUAL Cordless Screwdriver BFS440 BFS450 008874 IMPORTANT: Read Before Using.
-
Page 2: Specifications
Sound pressure level (L ) : 74 dB(A) Makita Corporation responsible Uncertainty (K) : 3 dB(A) manufacturer declare that the following Makita The noise level under working may exceed 80 dB (A). machine(s): Designation of Machine: Model BFS450 Cordless Screwdriver... - Page 3 Do not abuse the cord. Never use the cord for representative in Europe who is: carrying, pulling or unplugging the power tool. Makita International Europe Ltd. Keep cord away from heat, oil, sharp edges or Michigan Drive, Tongwell, moving parts. Damaged or entangled cords Milton Keynes, Bucks MK15 8JD, England increase the risk of electric shock.
-
Page 4: Cordless Screwdriver Safety Warnings
Power tool use and care Service 17. Do not force the power tool. Use the correct 28. Have your power tool serviced by a qualified power tool for your application. The correct repair person using only identical replacement power tool will do the job better and safer at the parts. -
Page 5: Functional Description
attention right away. It may result in loss of FUNCTIONAL DESCRIPTION your eyesight. Do not short the battery cartridge: Do not touch the terminals with any CAUTION: conductive material. Always be sure that the tool is switched off and the •... - Page 6 Overloaded: • NOTE: The tool is operated in a manner that causes Use a dry cloth to wipe the dirt off the lens of lamp. • it to draw an abnormally high current. Be careful not to scratch the lens of lamp, or it may In this situation, release the trigger switch on lower the illumination.
-
Page 7: Operation
Bit storage 1. Locator 008880 008890 1. Locator Fit the bit into the protrusion at the tool. Carry hook The carry hook is convenient for temporarily hooking the tool. It can be installed on either side of the tool. When removing the carry hook, widen it by pressing its right ends ON BOTH SIDES in the directions of arrow (1) and raise it in the direction of the arrow (2). -
Page 8: Maintenance
If you need any assistance for more details regarding Raise the arm part of the spring and then place it in the these accessories, ask your local Makita Service Center. recessed part of the housing with a slotted bit Phillips Insert bits •... - Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884813B221...