Box Camera Ii - HIKVISION DS-2CD883F-E Quick Operation Manual

Quick Operation Guide of Network Camera
13
Note: The type of auto-iris interface is shown in Figure 1-2, and the definition of each pin is shown
below:
Power, Video and GND pins are used when the auto-iris is driven by video; Damp+, Damp-, Drive+
and Drive- pins are used when the auto-iris is driven by DC.
Camera wiring Diagram:

1.1.2 Box Camera II

Camera description:
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
IN, G: Alarm input interface
Figure 1-2 Auto-iris Interface
Table 1-2 Pins
Video-driven
1 Power
2 NC
3 Video
4 GND
Figure 1-3 Wiring Diagram
DC-driven
Damp-
Damp+
Drive+
Drive-
2