Cube Camera Ii - HIKVISION DS-2CD883F-E Quick Operation Manual

Quick Operation Guide of Network Camera
No.
1
2
3
4
5
6
7
8
9
10
11
Note:
After the powering on of the camera, pressing and holding the RESET button for about 10 seconds
can reset all the parameters to the default settings.
Camera wiring Diagram:

1.4.2 Cube Camera II

Camera description:
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Table 1-12 Description
LINK: Network status LED indicator.
LED indicator is solid yellow when network connection is functioning
Power LED indicator, It is solid red when power is applied to the unit.
ETHERNET: 10M / 100M self-adaptive Ethernet interface
Screw hole, used to fix the camera to the bracket
Figure 1-23 Wiring Diagram
Description
Microphone
Infrared light (Optional)
Micro SD card slot
properly.
Lens
RESET: Reset button
Speaker
Power supply interface
15