W
iring diagram
Model 6411 (without Variable speed control and Reverse switch)
Machines Without Choke Coil
Important: Do not put slack portion of any Lead wire in the space surrounded by Field and Brush holders.
Otherwise Lead wires will be broken by rotating Armature.
Fig. D-2
Put slack portion of Field lead wire (black)
in the space between Brush holder and
inside wall of Housing (L).
See "Connecting Lead wire to Brush holder".
Route the following two Lead wires
between the ribs:
*Field lead wire (white)
*Lead wire (black)
from No.2a Terminal of Switch
to Brush holder
Power supply cord
Connecting Lead wire to Brush holder
1) Brush holders are not reversible
when assembled to Housing (L).
Terminal insertion hole of each
Brush holder must be positioned
outside boss A/boss B.
2) Do not route each Lead wire
inside boss A/boss B.
See "Connecting Lead wire to Brush holder".
boss A
boss B
Switch
boss A
boss B
Brush holder
Field
Route Field lead wire (white)
under Brush holder.
Field lead wire (black)
Terminal
Lead wire (black)
from No.2a Terminal of Switch
P 8/12
Brush holder