Makita VC3510 Instruction Manual page 15

4
....
TO USE A POWER TOOL WITH THE VACUUM CLEANER:
The filter cartridge should always be attached (Fig. "C1").
CAUTION:
Remove the foam filter if installed (Fig. "C4").
- Always keep the filter system in good working order to ensure efficient operation.
We recommend the repetitive cleaning of the filter element.
-
-
Insert the sleeve of the flexible hose (part no. 01 321B0N) in the air inlet connector (r)
"C5")
-
Plug in the power tool, then the vacuum
-
With the cable clamp cod. 50 318BHN, fix the cable of the electric power tool to the flexible
(fig. "C9").
hose
-
Turn on the appliance
D - MAINTENANCE
VERY
IMPORTANT:
1
.... CHANGING THE DUST BAG
(pack code 83 133B8K *)
CAUTION: The paper bag must never be re-used but only be replaced.
- Remove the plastic flange (1) from the air inlet connector (2) (fig. "D1").
- Take out the full bag (fig. "D2").
- Close the plastic flange with the cap provided (fig. "D3").
and the adapter (u) in the dust conveyer of the electric power tool
as described in point "A3".
Always unplug the appliance from the
power supply before cleaning or servicing
the filter system in any way.
as described in point "A5" (fig. "C7"-"C8").
- 15 -
(fig. "C6").
Cod.
83 133B8K *
*
Pack code
EN
(fig.