Section 4: Operations; Operation Safety; Power Controls - Grizzly G0463 Owner's Manual

SECTION 4: OPERATIONS

Operation Safety

Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
-18-

Power Controls

It is vital that you become familiar with the power
controls before operating the Model G0463.
Three separate switches control the power on the
mill/drill (see Figure 10).
2
1
3
Figure 10. Control panel components.
1. EMERGENCY STOP Button: Immediately
disconnects power to the system. Once
pressed, this button must be twisted until it
pops out to return power to the switches. The
FAULT INDICATOR Light will turn on and the
MAIN POWER Switch needs to be turned
OFF.
2.
FAULT INDICATOR Light: Indicates a cir-
cuit interruption due to a switch being out of
proper position. Turn all switches OFF when
lit.
3.
POWER INDICATOR Light: Shines when the
system power is ON.
4.
Fuse Socket: Houses a 10 Amp system fuse.
Model G0463 (Mfg. 2/09+)
4
5
6
7