Indicator Lights (*) - Honeywell GKP-S8M User Manual

Indicator lights (*)

The front cover of the keypad features LED indicators which
show the status of your security system.
LED 1 indicator "system armed"
On: Total set is being armed.
Flashing slowly: Partial set is being armed.
Flashing quickly: Annex set is being armed.
Off: The system is disarmed.
LED 2 indicator "intruder alarm"
On: An intruder alarm is occurring or a detector is triggered on
set. This includes open door-contact, movement detection or
smoke detection.
Flashing slowly: An intruder alarm is in memory on set and
requires a reset.
Flashing quickly: A confirmed alarm is in memory and requires
a remote reset. Please call your monitoring operation at the
alarm company.
Off: No intruder alarm.
LED 3 indicator "system fault"
On: A system fault is occurring on set.
System faults include battery or power failure, supervision fault,
GSM/GPRS failure or radio Jamming, smoke sensor failure.
Please contact your alarm company if this indication persists.
Flashing slowly: A system fault is in memory on set and
requires a reset.
Off: No system fault.
LED 4 indicator "tamper alarm"
On: A tamper alarm is occurring on set.
Flashing slowly: A tamper alarm is in memory on set and
requires a reset.
Off: No tamper alarm.
(*) If keypad installed with CMI, HMI, Sucre Box panels. Refer to Annex A if keypad
installed with PMI panels.
12