Honeywell GKP-S8M User Manual page 10

5. After a few seconds, a double beep is played and all LED stop
flashing.
To enable/disable chime:
1. Press and hold the
2 seconds to enter user programming mode.
A double beep is played and all status LEDs light on.
2. Press the
A double beep is played and all status LEDs start flashing.
3. Press the
disable the chime.
A long beep is played.
4. Press the
you changes.
5. After a few seconds, a double beep is played and all status
LED stop flashing.
MASTER USER FUNCTIONS
To associate a TAG to a user:
1. Press and hold the user number "0 to 9" key for 3 seconds (1
is the master).
A double beep is played and all LEDs light on.
2. Enter the master code or present the master tag.
A beep is played and all status LEDs start flashing.
3. Present a new TAG.
The programming mode ends automatically.
4. After a few seconds, a double beep is played and all status
LED stop flashing.
The operation fails if the TAG is already registered.
If the user already has a TAG, the new one will take its place.
To change a user's code:
1. Press and hold the user number "0 to 9" key for 3 seconds (1
is the master).
and
key.
key to enable the chime or the
key to exit user programming code and save
keys simultaneously more than
key to
9