Makita PTM0900 Operator's Manual page 118

32
EN
6.2.3 Rear axle
This is a sealed single unit that does not require maintenance. It is permanently lubri-
cated and its lubricant does not need changing or topping up.
6.2.4 Battery
The battery must be carefully main-
tained to ensure long life. The machine
battery must always be charged:
– before using the machine for the first
time after purchase;
– before leaving the machine disused
for a long period;
– before starting up the machine after
a long period of disuse.
Carefully read and observe the battery
recharging instructions in the booklet
provided with the battery. Failure in fol-
lowing the instructions or in charging
the battery could permanently damage
the battery cells.
A flat battery must be recharged as
soon as possible.
IMPORTANT
voltage. Other recharging systems can irreversibly damage the battery
The machine comes with a connector (1) for recharging; this is connected to the corre-
sponding connector for the special "CB01" maintenance battery-charger supplied
( if included) or available on request (
IMPORTANT
maintenance battery-charger. For its use:
– follow the instructions in the relevant user manual,
– follow the instructions in the battery manual.
Recharging must be done using a battery charger at constant
This connector must only be used for connection to the "CB01"
8.5).
MAINTENANCE
1
1