Honeywell MAXPRO Operator's Manual page 19

2.
Caution:
MAXPRO NVR Operator's Guide
Step 2 - The CAMERA DISCOVERY page displays.
• All the settings that you have saved on the CONFIGURATION page are listed, along with
the discovered cameras. As each connected camera is discovered (notice the message
that displays on the lower right of your monitor) it is added to the list. This list disappears
as the cameras are added to the MAXPRO NVR software.
Note:
The ADD button on the CAMERA DISCOVERY page displays only if you have
selected "NO" corresponding to Auto Add Discovered Camera in the
CONFIGURATION page. Use the ADD button to add discovered cameras of
your choice to the MAXPRO NVR software. Select the check boxes
corresponding to a camera from the discovered list, and click ADD to add the
cameras.
• Click BACK to return to the CONFIGURATION page or Click DONE when the number of
cameras discovered equals the number of connected cameras.
Only Honeywell cameras are discovered and added in the MAXPRO NVR
Wizard. To discover and add other Third party PSIA/ONVIF compliant
cameras, see Adding Third Party PSIA, ONVIF and AXIS Cameras
47. For adding and configuring Third party RTSP cameras, the RTSP
settings must be specified, see
M A X P R O N V R W I Z A R D
RTSP Settings on page 45.
on page
15