Related Manuals for Makita HM1201
Summary of Contents for Makita HM1201
- Page 1 INSTRUCTION MANUAL Demolition Hammer HM1201 007307 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model HM1201 Blows per minute 2,000 min Overall length 480 mm Net weight 9.1 kg • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country. - Page 3 13. Prevent unintentional starting. Ensure the and the work to be performed. Use of the power switch is in the off-position before connecting tool for operations different from those intended to power source and/or battery pack, picking could result in a hazardous situation. up or carrying the tool.
-
Page 4: Functional Description
The side grip swings around to either side, allowing easy SAVE THESE INSTRUCTIONS. handling of the tool in any position. Loosen the side grip by turning it counterclockwise, swing it to the desired WARNING: position and then tighten it by turning clockwise. DO NOT let comfort or familiarity with product Installing or removing the bit (gained from repeated use) replace strict adherence... -
Page 5: Replacing Carbon Brushes
Run the tool for several minutes to warm it up. Switch off Cold chisel • and unplug the tool. Scaling chisel • Remove the crank cap using a Makita lock nut wrench 35 Clay spade • (optional accessory). Rest the tool on the table with the Grooving chisel •... - Page 6 Rammer • Bushing tool • Lock nut wrench 35 • Hex wrench • Safety goggles • Hammer grease •...
- Page 8 Makita Corporation www.makita.com 883380F7...