Page 1
ONCEPTION AND MAIN APPLICATIONS Model LS1O3ON is improved version of the existing Model LS1030. This model is the is sister Version of Model LS1040 except for Bevel Cut function, which LS1030N is not equipped. pecifications Continuous Rating (W) Voltage (V)
Page 2
<#LS1030N> Hndle for carrying More efficient chip/sawdust collection . More efficient collection LS1030N 87% LS1030 . less ejection toward operator T.C.T. Saw Blade 255 Rigid arm Accurate cutting can be performed. Very quiet Noise at no load Positive stops at turn base...
Page 3
Greasing Grease the MAKITA grease on the movable and sliding points shown below. Up/down swinging points for the blade case Blade case, Arm, Rod 16 Turning support point of turn base and sliding point Turn base, Center on the base, Slide plate...
Page 4
Assembling of the slide plate Assemble the slide plate according to the base shape as shown on the figure below. Slide plate Base Fastening of the hexagon bolt M8 for mounting the turn base Adjust the fastening degree of the hexagon bolt M8 on the center of the turn base so that the turn base can smoothly move without clearance.