Advertisement
6.
Install the left and right audio bracket.
With Cassette Player:
• Set the audio unit on the cassette player and
attach the left and right audio brackets to the
audio unit using the four washer-screws
removed in step 5.
• Attach the left and right audio brackets to the
cassette player using the four supplied
5 x 8 mm washer-screws.
WASHER-
SCREWS
LEFT
(Removed
BRACKET
in step 5.)
AUDIO UNIT
5 x 8 mm
WASHER-
SCREWS
(Included
with the
cassette
CASSETTE
player.)
PLAYER
Use the
middle hole.
With In-Dash CD Changer:
• Attach one adhesive strip to the bottom of the
In-Dash CD changer.
© 2010 American Honda Motor Co., Inc - All Rights Reserved.
Use the
lower hole.
RIGHT
BRACKET
WASHER-
SCREW
(Removed
in step 5.)
5 x 8 mm WASHER-
SCREWS
(Included with the
2625080K
cassette player.)
ADHESIVE STRIP
Clean the In-Dash CD changer
with isopropyl alcohol before
attaching the spacer.
Bottom of the
In-Dash CD
changer
•
Set the audio unit on the In-Dash CD changer
and attach the left and right audio brackets to
the audio unit using the four washer-screws
removed in step 5.
•
Attach the left and right audio brackets to the
In-Dash CD changer using the four supplied
5 x 8 mm washer-screws.
WASHER-SCREWS
(Removed in step 5.)
5 x 8 mm
WASHER-
SCREWS
(Included
with the
In-Dash CD
changer.)
7.
Attach the harness clip to the back of the player or
In-Dash CD changer using the 5 x 8 mm washer-
screw or 4 x 6 mm washer-screw.
With Cassette Player:
AUDIO
UNIT
BUS CABLE
CONNECTOR
5 x 8 mm WASHER-SCREW
(Included in cassette
player.)
AII 43483 (1010)
Use the
lower hole.
LEFT AUDIO
BRACKET
AUDIO UNIT
In-Dash CD
CHANGER
Use the
middle hole.
5 x 8 mm WASHER-SCREWS
(Included with the In-Dash
CD changer.)
HARNESS CLIP
(Included in
cassette
player.)
RIGHT
BRACKET
WASHER-
SCREWS
(Removed
in step 5.)
2625090K
CASSETTE
PLAYER
3 of 5
Advertisement
