NETGEAR 700 Series Software User's Manual page 24

700 Series Managed Switch User's Guide for Software v2.1
There are several characteristics to the CMI pages that are necessary to know before proceeding to
use it. The TAB key or the arrow keys may be used to move within menus and sub-screens. At the
bottom of every screen are some key commands available to the user for that particular screen, as
well as some helpful information.
The common keystrokes and their definitions and intricacies are listed below:
ESC
Tab
Ctrl-L
Ctrl-D
Ctrl-M
Ctrl-W
Spacebar
Enter
Ctrl-X
The main menu displays all the sub-menus that are available. Striking 'Enter' when an option is
highlighted will confirm the choice of the specified sub-menu. The 'hotkey' or letter in front of
each menu option can also be typed to directly choose that option. As shown below, there are six
menu items to choose from:
Figure 4-5: Main Menu
To logout of the user interface, hit Ctrl-D at any time during your telnet session. You will be
brought back to the login screen (password enabled) or Main Menu (password disabled).
4-4
Return to the previous menu or screen, or abort editing
Select field
Refresh the screen
Log off (password enabled)
Move to field (Switch Statistics and Port Configuration menus only)
Saves current configuration to Non-Volatile RAM (NVRAM)
Toggles between possible settings for a field
Select a menu item, edit a field, or accept a value after editing a field
Delete a table entry
SM-10004-02
Administration Console Telnet Interface