Table of Contents
Advertisement
Syntax
FSM726(config)# system radius authen-mode [local | local-then-remote | remote]
Where
= authentication is performed locally and not through an external RADIUS server
Local
Local-then-remote
server
= Authentication is performed by a remote server and not locally.
Remote
•
Server-IP
The
command is used to set the IP address of the RADIUS server
Server-IP
Syntax
FSM726(config)# system radius server-ip <IP-address>
Where
= IP address of the RADIUS server
<IP address>
•
Shared-Secret
The
shared-secret
Syntax
FSM726(config)# system radius shared-secret <shared secret>
Where
= the RADIUS shared secret
<shared secret>
Reset
Use the reset command to reboot the switch.
Syntax
FSM726(config)# system reset
Command Line Interface
700 Series Managed Switch User's Guide for Software v2.1
= Authentication is performed locally first, then by an external RADIUS
command lets you set the RADIUS shared secret
SM-10004-02
6-31
Advertisement
Table of Contents
