System; Trunking - NETGEAR 700 Series Software User's Manual

Managed switch
Table of Contents

Advertisement

700 Series Managed Switch User's Guide for Software v2.1

System

The
command displays system-related data.
show system
Syntax
FSM726# show system
An example of the display output is shown below.
System Uptime: 0 Days 1 hr. 42 min. 15 sec.
System Description: FSM726 Managed Switch
System name: Switch #1
System contact: Tom
System location: Closet #2
MAC Address: 00:09:5b:36:b0:07
IP Assignment Mode: Manual
IP Address: 169.254.224.1
Network Mask: 255.255.0.0
Gateway Address: 169.254.224.5
Web Access is: Enabled
Telnet Access is: Enabled
Password is: Disabled
User Authentication Mode is Local
RADIUS Server IP Address: 0.0.0.0
Shared Secret is:
Hardware Version: RA
Boot ROM Version: 1.2 (2495)
Software Version: 1.0.4 (2505)
Next Boot from: Last Saved
TFTP Server IP Address: 0.0.0.0
TFTP Path/Filename:
IP Filtering is: Disabled

Trunking

The
command displays the trunking state of the switch. The FSM726 is capable
show trunking
of forming four trunks, so shown in the display are the ports that belongs to each trunk.
Syntax
FSM726# show trunking
An example of the display output is shown below.
6-10
Command Line Interface
SM-10004-02

Advertisement

Table of Contents
loading

Table of Contents