Accessing Your Router After Installation - NETGEAR WNR2000V3 Setup Manual

Accessing Your Router After Installation

The NETGEAR genie only appears when you first install the router or when the router is in its
factory default state (for example, if you have reset the router to its default factory settings). If you
want to change the settings after installing and configuring your router using the NETGEAR
genie, you must open a browser window and log in to the router. You will also be prompted to
check for new router firmware. For more information, see "Configuring Your Wireless Network"
on page 21.
Installing Your Router Using the NETGEAR genie 11