Accessing Your Router After Installation - NETGEAR WNR3500Lv1 Setup Manual

To set up additional wireless computers in your network to access the router and connect to the
Internet, see "Configuring Your Wireless Network" on page 22.

Accessing Your Router After Installation

The Smart Wizard only appears when you first install the router or when the router is in its factory
default state (for example, if you have reset the router to its default factory settings). If you want to
change the settings after installing and configuring your router using the Smart Wizard, you must
open a browser window and log in to the router. You will also be prompted to check for new router
firmware. For more information, see "Configuring Your Wireless Network" on page 22.
Installing Your Router Using the Smart Wizard 11