Table of Contents
Advertisement
................. Do not short batteries.
....... Always recycle batteries.
................ Do not discard batteries into
garbage can or the like.
NOTE:
The recycling method may differ from country to country, or state (province) to state (prov-
ince). Consult with your nearest Makita Authorized Service Center or Distributor.
SAFETY INSTRUCTIONS
WARNING:
When using battery operated tools basic safety precautions,
including the following, should be followed to reduce the risk of
fire, leaking batteries and personal injury: Read these
instructions before operating this product and save these
instructions.
For safe operation:
1. Keep work area clean. Cluttered areas and
benches invite injuries.
2. Consider the work environment. Do not
expose the tool to rain. Keep work area well
lit. Do not use tools in the presence of flam-
mable liquids or gases.
3. Keep children away. Do not let visitors touch
the tool. Keep visitors away from work area.
4. Store batteries or idle tools. When not in
use, tools and batteries should be stored
separately in a dry, high or locked up place,
out of reach of children. Ensure that battery
terminals cannot be shorted by other metal
parts such as screws, nails, etc.
................To avoid injury from flying
debris, keep holding the saw
head down, after making cuts,
until the blade has come to a
complete stop.
...............For your safety, remove the
chips, small pieces, etc. from the
table top before operation.
5. Do not force the tool. It will do the job better
and safer at the rate for which it was
intended.
6. Use the right tool. Do not force small tools
or attachments to do the job of a heavy duty
tools. Do not use tools for purposes not
intended.
7. Dress properly. Do not wear loose clothing
or jewellery, they can be caught in moving
parts. Non-skid footwear is recommended
when working outdoors. Wear protecting hair
covering to contain long hair.
8. Use protective equipment. Use safety
glasses and if the cutting operation is dusty, a
face or dust mask.
9. Connect dust extraction equipment. If
devices are provided for the connection of
ENA002-1
3
Advertisement
Table of Contents
