Makita BDF442 Instruction Manual page 7

Fig.13
Use pliers to remove the carbon brush caps of the
carbon brushes. Take out the worn carbon brushes,
insert the new ones and replace the carbon brush caps
in reverse.
Fig.14
Make sure that the carbon brush caps have fit into the
holes in brush holders securely.
Fig.15
Reinstall the rear cover and tighten two screws securely.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
ACCESSORIES
CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Drill bits
•
Screw bits
•
Bit holder
•
Hook
•
Various type of Makita genuine batteries and
•
chargers
Automatic refreshing adapter
•
Plastic carrying case
•
or attachments
Only use accessory or
are
7