Operation - Makita BCL140 Instruction Manual

Connect capsule. Align O symbol on capsule with O
symbol on handle and then firmly twist capsule in
direction of arrow until it is secured.
1
010001
010002
NOTE:
Always remove dust ahead of time, as suction
•
power will be reduced if there is too much dust in
cleaner.
Always be sure to check that both filter and prefilter
•
are loaded correctly prior to using cleaner. If they
are not loaded correctly, dust will get into the motor
housing, and cause motor failure.
If the following examples occur, filter and prefilter
are not loaded correctly. Reload them correctly to
rectify problem.
Problem Examples
Example 1: Only prefilter has been loaded (no filter)
010003
1. Mark
1. Handle
1
2. Capsule
2
1. Prefilter
1
Example 2: Only filter has been loaded (no prefilter)
1
010004
Example 3: Filter has been loaded in a peeled back state
1
010005
Example 4: Prefilter's securing lip is not firmly locked into
groove of cleaner housing
1
2
010006

OPERATION

CAUTION:
To connect
•
twist-insert attachment in direction of arrow to
ensure secure
disconnect attachment,
direction of arrow.
If attachment is twisted in the opposite direction,
when being connected or disconnected, capsule
may become loose.
6
1. Filter
1. Filter
1. Groove of
3
cleaner housing
2. Prefilter
3. Securing lip
attachments, such
connection during
twist-extract
as nozzle,
use. To
also in