Timer Recording - Honeywell hr960 Manual

N O T E
* DAY : Day of the week
* START : Recording start time
* END : Recording end time
* SPD : Recording mode display
English-20
DAY START END SPD
OFF --- --:-- --:--
OFF --- --:-- --:--
OFF --- --:-- --:--
OFF --- --:-- --:--
OFF --- --:-- --:--
OFF --- --:-- --:--
OFF --- --:-- --:--
OFF --- --:-- --:--
[ ][ ][CLEAR] [MENU] EXIT
Press the MENU button to display the main menu on the monitor.
1
Press the MOVE button continuously until
2
Press SELECT button. And press MOVE button continuously until
3
PROGRAMMING position. Then press SELECT button.
When TIMER PROGRAM CHART appears on the monitor, press the SELECT button again.
4
ON( or OFF)will blink.
To disregard the timer program, set OFF.
Record the desired timer program by pressing (+) or (-) button.
5
To move to the next position, press SELECT button.
When you finished above process, press the MENU button to exit from TIMER
6
PROGRAM. Then press TIMER button to activate TIMER PROGRAM. The power will be
off and will be displayed.
HOW TO AVOID MISTAKES WHEN USING THE TIMER
If an error is encountered when the TIMER button is pressed, refer to the following table.
Symptom
"EJECT No tape"
No
on screen.
display
"Stop No safety tab"
of .
on screen.
"Stop No timer
programs" on screen

TIMER RECORDING

* "DLY" (in "Day of the week") is used for the same
time recording everyday.
* A 24-hour display is used. 00 : 00 indicates
midnight ; 12 : 00 midday and 15 : 00 3 o'clock in
---
---
the afternoon.
---
* If the recording
---
---
times of two
---
programs overlap,
---
---
the later program
is given a priority, which means some of A
program will be lost.
* In Linear REC mode, sound is also recorded.
* DAY mode covers MON, TUE . . . . . SAT, SUN, M-
F (MON-FRI) and DLY (Daily).
comes to CLOCK / TIMER position.
Check points
• Check if a tape
is not inserted.
• Check if the tape lost
safety tab.
• Check if timer programs are
not input in timer program.
comes to
Things to do
• Insert a recordable tape that
has safety tab on it.
• Replace with a tape with safety
tab on it. •Attach the safety tap.
• Input any timer programs to
record in timer program.