Table of Contents
Advertisement
ALARM RECORDING ( CONTINUED )
You must set the alarm recording mode in the ALARM SET menu before executing alarm
recording.
Press the MENU button to display MENU on the monitor.
1
Then Select ALARM SET using MOVE button.
Set MODE to ON by pressing the SELECT button.(ON/OFF)
2
Set Speed(L6H, L18H, L30H)
3
Set BUZZER(ON/OFF)
4
Set DURATION(1/3/5 MIN/T-END/LEVEL)
5
When you finish ALARM RECORDING SETUP by following 1~5 steps above, try inputting the
alarm signal. Then recording will start with buzzer. If you set the DURATION to T-END,
recording will be done to the end of the tape. If you set it to 3MIN(or 5 MIN), recording will be
done within the indicated time.
LEVEL setup - The recording continues for 1 min. in case of within 1 min.
- The recording continues for the time that ALARM IN signal is input in case of
above 1 min.
During alarm recording, the alarm recording mark ('A') will automatically be displayed on
screen.
* The alarm in indicator( ) blinks during alarm recording and on when the alarm recording
is finished.
* When the alarm recording is finished, the VCR resumes recording in the same record
modes as before the alarm recording.
MENU
VCR SET UP
ALARM SET
SEARCH
CLOCK/TIMER
POWER FAIL RECALL
LANGUAGE
[
] [
]
[MENU] EXIT
ALARM SET
MODE
ON
SPEED
L6H
BUZZER
ON
DURATION
1 MIN
ALARM RECALL
[
] [
]
[MENU] EXIT
N O T E
* Initial value of PAL set SPEED = L6H
N O T E
* If a set signal is applied during alarm
recording, a new alarm recording will
start with the new set signal.
* Alarm recording will continue for the
duration of time which has been set in
ALARM REC DURATION menu, even if
a timer recording has reached its end
time.
* Alarm recording stops when the end of
the tape is reached.
* Alarm recording can start recording
when an alarm is triggered even if the
VCR is stopped or is set for timer
recording.
English-17
Advertisement
Table of Contents
