Setting The Clock (Initial Clock Setting), Setting The Menus - Honeywell hr960 Manual

SETTING THE CLOCK ( INITIAL CLOCK SETTING )
When the VCR is turned on for the first time or after exhaustion of the battery, initial clock set
up is needed. Without inputting the clock data, the time to be recorded on the recorded
pictures will not match with the time of the incidents. Therefore make sure that you fill out
correctly before exiting menu.
FORMAT
DATE
TIME
PROGRAMMING
ELAPSED USE TIME
[
By pressing SELECT key, date format change like following order.
MM/DD DD/MM MM/DD/YY
• MM/DD, DD/MM : field conuter display (record screen)
• MM/DD/YY, DD/MM/YY : year display (record screen)
MENU OPERATION
1. Press MENU button.
2. Press MOVE to shift the cursor (
3. Press SELECT to select or adjust the default value, and when having a following
informative page, it enters into the next mode.
4. Press SPEED(-) or SPEED(+) to adjust the cursor value.
5. Press MENU to exit the OSD mode.
CLOCK / TIMER
MM / DD
-- / -- / [----]
-- : -- : --
] [ ] [MENU] EXIT
DATE FORMAT
DD/MM/YY
SETTING THE MENUS
) downward.
0000H
N O T E
*You can amend the data by using
speed -/+ keys when the above menu
appears and the record and playback
speed will not be changed at that time.
*Year entries must be made, even in
MM/DD and DD/MM format to ensure
correct display.
English-11