Honeywell hr960 Manual page 18

English-18
ALARM RECORDING ( CONTINUED )
When alarm recordings begin, the start times are stored in the
memory so it is possible to confirm when they have occurred.
Select the ALARM RECALL in the ALARM SET menu and the alarm
list display will appear on the screen.
* Up to 8 alarm recording start times can be stored in memory.
Therefore, the latest 8 alarmed times will be displayed.
* The alarm recording list is reset by the following procedure.
• Select the CLEAR button in the ALARM RECALL of ALARM SET
menu.
LOCATING THE START OF ALARM RECORDINGS
This machine automatically inserts an index signal at the beginning of each ALARM
RECORDING allowing the start of each alarm to be located with Alarm Scan.
ALARM SCAN
* In SEARCH menu, select ALARM SCAN REVERSE or ALARM SCAN FORWARD. Then it
fast searches forward or backward to the previous (or next) alarm position and starts
playback.
It is automatically repeated to the end of tape.
* At the alarm position you want,press PLAY
* The index signal may be difficult to locate in some poorly recorded conditions.
ALARM RECORD TIME DISPLAY
stop and then playback
ALARM RECALL
1 -- / -- / -- -- : -- : --
2 -- / -- / -- -- : -- : --
3 -- / -- / -- -- : -- : --
4 -- / -- / -- -- : -- : --
5 -- / -- / -- -- : -- : --
6 -- / -- / -- -- : -- : --
7 -- / -- / -- -- : -- : --
8 -- / -- / -- -- : -- : --
[CLEAR] [MENU] EXIT