Replacing The Separator Roller - Fujitsu fi-6800 Operator's Manual

Chapter 6 Replacing Consumables

6.3 Replacing the Separator Roller

1
Remove all documents from the stacker.
2
Open the ADF.
For information on how to open the ADF, refer to
Closing the ADF" (page 19).
Be careful not to have your fingers caught
when the ADF closes.
3
Remove the separator roller from the scanner.
1 Open the roller cover. Grab the tabs on the left and right with your
fingers and pull down the cover towards you.
"1.5 Opening/
Roller cover
Tab
2 Pull down the lever which is located on the right-hand side of the
separator roller.
Separator Roller
3 Pull down the lever which is located on the left-hand side of the
separator roller.
Separator Roller
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use
Lever
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Lever
Operational
Settings
Appendix
Glossary
97