About The Indicators - Fujitsu fi-6800 Operator's Manual

Chapter 3 How to Use the Operator Panel

About the Indicators

Paper Separation Force
Displays the paper separation
force as follows:
Icon Low High

iMFF Setting
Displays the iMFF setting as follows:




The icon switches when the [iMFF]
button is pressed down for more than
For information on how to
adjust the paper separation
two seconds. In Manual mode,
force, refer to "1.9 Adjusting
is displayed at all times.
the Paper Separation Force"
In Auto mode 1 and Auto mode 2, it
(page 25).
displays the number of multifeed
patterns memorized (max. of 8
patterns). For information on how to
configure the iMFF setting, refer to
Main Menu" (page
Multifeed Pattern Memory
appears when memorizing a multifeed pattern.
For information on how to memorize multifeed patterns, refer to
"Bypassing Multifeed Detection for a Fixed Format" (page
Icon Mode
Manual mode
Auto mode 1
Auto mode 2
"3.2
50).
78).
Information
appears when a message for replacing consumables/cleaning/
replacing maintenance parts/regular maintenance is displayed.
For instructions on when is displayed, refer to
(page 50).
Prioritize Panel Settings
appears when the operator panel settings are prioritized.
For information on how to prioritize the operator panel settings, refer to
"3.2 Main Menu" (page 50).
MF Quick Change Setting
Displays whether or not to detect multifeed as follows:
Icon
Normal Doc Counting Mode
The icon switches when the [Eject] button is pressed. Normally, one of
the above icons for "Normal" appears when [Enable(Detect)] or
[Enable(Ignore)] is specified. For information on how to configure the
MF Quick Change setting, refer to "3.2 Main Menu" (page
Counting mode, one of the above icons for "Doc Counting Mode"
appears regardless of the MF Quick Change setting.
[Send to/Pause] Button Configuration Number
Displays the number assigned to the application that is launched when
the [Send to/Pause] button is pressed. For information on how to
configure the [Send to/Pause] button, refer to
(page 66).
Introduction
Scanner
Overview
"3.2 Main Menu"
How to Load
Documents
How to Use
the Operator
Panel
Various Ways
to Scan
Detection
method
Daily Care
Enable (Detect)
Enable (Ignore)
Replacing
Consumables
Troubleshooting
50). In Doc
Operational
Settings
"3.3 Function Selection"
TOP
Contents
Index
Appendix
Glossary
49